Rehabbng an old Delta 37-301 jointer
![](https://secure.gravatar.com/avatar/640c7ce156f47f15bebf93a8734e0cb8?s=52&d=https%3A%2F%2Fimages.finewoodworking.com%2Fapp%2Favatars%2F200x200%2Fd.png&r=g)
Hi, I picked up an old Delta 37-301 jointer really cheap, but its missing a few things. First, I need to find a crank wheel for the outfeed side. Sec ond, I need to locate a back for this thing. Obviously, neither of these will prevent it being used, but I’d like to get them anyway. I also need some help with the locking mechanism for the fence. The lever is there, but it doesn’t seem to do anything. I suspect ots missing some parts inside, but I don’t know what should be there. Any help would be greatly appreciated. Thanks!!
Replies
Here is a good break down of that jointer: http://www.toolpartsdirect.com/cgi-bin/schematic.cgi/delta/37-301/
Another good source is http://www.owwm.org/index.php
Good folks that are a wealth of knowlege on older equipment
Information
Those are good sources - where you been Wericha ? Don't get lost again !
SA
This forum post is now archived. Commenting has been disabled