Replies

1. 
   CarpenterPJE | Dec 07, 2003 03:54pm | #1

   Skyking,

   I went to HD to take a look at the Ridgid saws, Look nice from the top.  Fence seems solid & large.  Then I  looked under the table.   Every thing is built so lite weight like Craftsman garbage.   Also the motor looked small for a 1-1/2 hp.  The whole thing just looked like something I would have to replace in short order.

   Good  luck & keep shopping

1. 
   Skyking1 | Dec 15, 2003 04:55am | #7

   Thx for rply..looking at Delta as well but HD makes delivery easy. We'll see!

2. 
   robert1 | Dec 11, 2003 11:46pm | #2

   I have the 3612 tablesaw which has served me well so far. It has a good fence, is fairly easy to set up and move around, and the guard is easy to remove for certain cuts. I am a weekend woodworker and for me, the saw represents a good value. In my opinion most traditional contractors saws will cut wood OK, after that I think it usually comes down to a personal decision. Good Luck!

1. 
   Skyking1 | Dec 15, 2003 04:58am | #8

   Thx for reply..Agree on fence. Saw has other good features. Comparing Delta in the same price range and think overall the Ridgid is stronger..motor maybe light but I doult I'll notice it formwhat I'm doing.

3. 
   silverC | Dec 12, 2003 01:17am | #3

   i have had this saw for 2 yrs.  works just fine, and the wheeled  base is invaluable!

   it is somewhat underpowered, and I would have preferred the wings to be a smooth top as opposed to 'fins'.

1. 
   Skyking1 | Dec 15, 2003 05:00am | #9

   Thx for reply..Comparing Delta in the same price range and think overall the Ridgid is stronger..motor maybe light but I doult I'll notice it for what I'm doing.

4. 
   shedhappens | Dec 12, 2003 06:38pm | #4

   I have that saw and am very satisfied with it's heft and accuracy.

   my only criticism is that it is not easy or comfortable to change the blade bevel. 

1. 
   Skyking1 | Dec 15, 2003 05:01am | #10

   Thx for reply..I'll follow advice about waxing table.

1. 
   shedhappens | Dec 15, 2003 04:00pm | #12

   I just remembered -- it wasn't a small job of assembly -- it took me several hours, even with the right tools.  but go ahead and take your time, -- you'll be glad you did. 

1. 
   Skyking1 | Dec 28, 2003 04:59am | #13

   Thanks..I was told the same by the Ridgeid rep at HD. He agve me a hint...cut the box away and assemble it upside down. Then get 3 or 4 string neighbors to help lift it upright.

5. 
   shedhappens | Dec 12, 2003 06:39pm | #5

   oh yeah, clean the table very well, and then paste wax it from day one and you'll never see rust and also reap the rewards of a ball-bearing smooth table top.

6. 
   oms | Dec 15, 2003 01:40am | #6

   I think that for the occasional use you have mentioned it is a good machine. I have had the Ridgid TS2424 for 3 years and it runs well with minimal maintenance.

1. 
   Skyking1 | Dec 15, 2003 05:05am | #11

   Thx for reply..looks like I'lkl get the Ridgid altho I have l looked at Delta and others. HD is nearby and getting it home is easier thatn truck delivery.

7. 
   ravenwind | Jan 16, 2004 06:02am | #14

   hi skyking1      I have the Rigid 10in with the folding stand with wheels and love it for me it is better then the reg contractors saw as i haul it in my trailer w/ back door that is a rampwhen opened .    it is strong enough and it came with a liftime warrenty and i think you can still get warrenty if its bought before Jan,30 2004.     

                                                             Dogboy   

1. 
   Skyking1 | Jan 17, 2004 06:21am | #15

   Agree. Yr right about Lifetime warranty, just keep original,purchase receipt. I was impreseed with assembly instructions and relative ease. Everything was correctly set up out of the box. Very minor adjsutment necesaary. Good product. Thx for the response.

1. 
   ravenwind | Jan 17, 2004 07:23am | #16

   I bought mine november and have been 100% happy with it and i was also impressed that it was already set up and the fence was lined up and wait till you go to set it up and move it around at how easy it is it still amazes me.      my friend steve bought one and hes happy with his too .   Dogboy