Replies

1. 
   JeffKurtz | Sep 04, 2003 10:43pm | #1

   Chris,

   Looks like an efficient use of the space you have with plenty of room to move things in and out.  I have a question, however.  With no bench or vise, where do you do your layout, joinery, and assembly?

   Jeff 

1. 
   user-425710 | Sep 05, 2003 02:23am | #2

   Outside the shop I have a table with castors on one end so I can move it around. It's nothing more than a 4x8 sheet of Plywood with legs and braces. It's not flat....but that is becuase I can't keep it that way. Stays in the weather. I suppose I could build a smaller one to roll in and out of the shop with a sealed MDF top or something....but I have so much to do right now that will have to wait.

   Thanks for the input. Would you place the tools on the workstations in any different order?

1. 
   JeffKurtz | Sep 05, 2003 02:28pm | #3

   Wondering how well your SCMS works with no apparent support on left side of the saw.  Here's a link to some some ideas for a small shop.  Check shop #3.

   http://www.woodmagazine.com/default.sph/wcontent_user.class?FNC=CategoryLink__Astory1_html___7___40

   Jeff

1. 
   user-425710 | Sep 06, 2003 03:29pm | #4

   Hmmmmmmmm.......SCMS is located on the left side of the station. Good point. I'll have to think up some kind of drop down support or something. Anything else will change the length of the station to the point where it won't fit.

   Thanks!