So I’ve decided to turn the tandem garage space into a workshop and I’m looking to get some initial power tools purchased off of craigslist. My goals for the workspace will be mainly focused on cabinetry for built-ins as well as tables and such. I’ve mainly just been accruing hand tools, dewalt table saw, mitre saw, etc. and haven’t yet ventured into some of the more professional grade power tools. I’m mainly looking for some feedback on some tools I found and whether they are good quality tools to buy used (and what a fair price is). I’m also debating whether I should start with some cheaper, less powerful tools, although I’m fairly committed to the hobby so I think I will make good use of whatever I end up getting. Thanks in advanced!
– Powermatic 15” Planer w/Byrd SHELIX Helical Cutterhead https://denver.craigslist.org/tls/d/castle-rock-powermatic-15-planer-byrd/7031048322.html)
– 24″ 7-1/2 HP 3-Phase Industrial Bandsaw (2007) (https://denver.craigslist.org/tls/d/glenwood-springs-24-band-saw/7023765742.html)
– Oliver 4240 10″ Jointer Straight Knife 3HP, 1Ph (https://denver.craigslist.org/tls/d/denver-super-nice-10-oliver/7032727461.html)
– Also looking for a nicer table saw so I’m open to recommendations above the base dewalt one I already have.
Replies
Those are not your usual starter tools. But unless you have 3 phase power available, stay away from anything that needs it.
With a jointer, planer, bandsaw and table saw along with a nice bench I'd say you're well on your way to be a serious hobbyist! As for price, that depends on you and your local market more than our "internet opinions" I think. :)
I agree with John about the 3-phase equipment, but if you have it there (which I assume you do or you wouldn't be considering buying the bandsaw), it's got plenty of power. I have no 220 or 3-phase tools in my garage shop, but that was a conscious decision. I had 220 to the shop but elected to split it into multiple 110 outlets.
Starter tools indeed! Those tools will think they are vacationing in Cabo. Without having looked at the prices, becaused used tools are worth what they are worth to buyer and seller "on the day", the helical planer is a great machine to have.
The bandsaw and jointer are also great if they don't need restoration and you have the 3phase, but they will not give you much layout flexibility. The finish off the jointer will likely leave you dissappointed compared to that off the planer.
Also figure in the cost to get them to where you need them and probably build pads for them before going ahead. Oh, you'll also need a monster dust collection system to keep up with those things.
Now the recommendations part..all tools you can move by yourself or with a pal. If it were me, and assuming 220 power is on site, I would upgrade my tablesaw first ( Sawstop 3hp PCS ), then look at a 12 or 16 inch helical jointer/planer combo machine ( Hammer/Felder or CWW ), then a nice bandsaw and dust system. FYI I am a tablesaw-centric shop guy...if you are a bandsaw guy then reverse those two.
This forum post is now archived. Commenting has been disabled