Hi I have a model 66 powermatic table saw about 16 years old. With out the 8 1/2in. extensions on is about .017 dip in the top, worst place is across the back and left front to right rear, but I have a crown between both mitres and throat plate worst on left, can’t get Fine Woodworking cut. Your thoughts on taking top to a machine shop or any advice is welcome. Thanks Mike
Discussion Forum
Get It All!
UNLIMITED Membership is like taking a master class in woodworking for less than $10 a month.
Start Your Free TrialCategories
Discussion Forum
Digital Plans Library
Member exclusive! – Plans for everyone – from beginners to experts – right at your fingertips.
Highlights
-
Shape Your Skills
when you sign up for our emails
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply. -
Shop Talk Live Podcast -
Our favorite articles and videos -
E-Learning Courses from Fine Woodworking
-
-
Replies
Top issues on your powermatic tablesaw
Mike:
You may want to try loosing the bolts that hold the top to the base of the saw and recheck for flatness. It is possible that the top is deflecting some to match the base. If so, you might be able to shim the top as needed where it mounts to the base. Otherwise a machine shop may be your only quick solution. I'm curious, was the table this bad when the saw was new?
gdblake
This forum post is now archived. Commenting has been disabled