I am not sure if this subject belongs in this particular forum but here goes. I want to make a dining table that using two turned pedestals. Actually, it is the table Norm built a while back.
http://www.newyankee.com/getproduct3.cgi?0411
I do not have a lathe so I need a source where one can buy pedestals, preferably in several types of wood (mahogany, cherry, etc) and styles. Any suggestions? Thanks
Dave
Replies
Here's a few to get you started: http://www.Adamswoodproducts.com, http://www.Brownwoodprod.com, http://www.Osbornewood.com, and http://www.tablelegs.com
Edited 2/7/2006 7:44 am ET by gnome
Edited 2/7/2006 7:44 am ET by gnome
Thank you gnome. It looks like there really isn't a huge selection out there (Adams has some to choose from)although Osbourne looks like they could custom turn one for you.
Consider doing some networking. Check with local woodworkers and lumber suppliers in your area. Bound to be a few turners who would do the work. Woodworkers and lumber guys would know all the other people who do all kinds of unusual things. My boss keeps a turner in his workshop at home. Guess he gets some kind of deal with the rent or something.
Dave there is only a small area that is turned. You might consider changing the design slightly. The turned portion could be 3,6 or 9 sides glued up. I would use any of these so the three legs will be spaced from the center the same.
You may have someone near you that could turn the pedestal if that is what you want.
mike
Get a prototype or two done by a pro company as suggested-pay the price- then look up(Google) your local WW club, or turners club. These folks love to turn and could do these turned sections in a heart beat. Just give them the wood as you need the stock to match in finishing and a sample/ template, and your problem is solved. Some of the folks are very talented and you should seek out a few(create a resource to provide parts in the future) to cover production needs (who went on vacation, you need 20 pieces in 10 days etc.)
Many of the " club" folks are retired and would revel in the the thought that they were "in production mode", their pride of craftsmanship will scare you. Now you have to spend the time to weed out the the less skilled for your needs, but that is easy with a visit to their home shop. best of luck, Pat
Ps. learn to turn?
Learning to turn...eventually :)
Thank you all for your suggestions. I think I will look to see what is in my area.
This forum post is now archived. Commenting has been disabled