Replies

1. 
   Kevin | Jun 22, 2003 05:02am | #1

   I don't see why it wouldn't. Just scuff the shellac with some fine sandpaper or some other form of abrasive before applying the poly.

   Regards,

   Kevin

2. 
   Joe_Fusco | Jun 22, 2003 06:40am | #2

   The varnish would take even if the shellac wasn't dewaxed. . .

   View Image
3. 
   HowardAcheson | Jun 22, 2003 06:58pm | #3

   The T&T relies on the finish penetrating the wood surface to work. It is not a varnish inspite of it's name. It is really an oil/varnish product (polymerized linseed oil with some varnish resins added) in the same league as Watco and some other oil/varnish products. As I recall, the directions say to apply to virgin wood.

   I would recommend a real varnish if you want to overcoat the shellac. Don't look for a penetrating type finish, use a film finish.

4. 
   BertJ | Jun 24, 2003 07:59pm | #4

   drusinak,

   A agree with Howie. To elaborate, shellac forms a film, sealing off the wood. Oils penetrate the wood--that's how they protect the wood. The two work in completely different ways. If you start with shellac, it is recommended that you continue with a film-type finish (shellac, lacquer, etc.). If you use oil, use it on bare wood.

   BJ