What kind of slabs did I just find in my attic!!!!????
Hi my name is chris and I’m New to this site. So, recently I have found interest in woodworking and coincidently enough yesturday I found in my garage attic from previous owners about 20 slabs of lumber around 15″w x1-3″thick x 20’long. But I have no clue what they are. I only did a quick router plan and through a lil danish oil so I could see a sample of my discovery. Please help me identify this surprise that has stumbled upon me. Second and third pic are same just flipped over. The first is super yellow, similar to tulip poplar
Replies
First one possibly poplar?
Second one is maple.
Third might be maple as well?
I might go with cherry for pic 2 and 3. Realkky hard to say from those pictures though.
Hard to tell without looking at grain size. Open, closed or some were in between. Looks ok to make something with so go for it.
Thanks for the help. I think it's safe to call the yellow one rainbow poplar, I flattened it out a bit more and alot of purple and pink has been revealed. As for the other I cant decide between cherry or maple. I heard if you cut a small piece of cherry you can tell by the smell? What does cherry smell like? Once they are fully flattened I will post updated pictures. Wish me luck on my first table
For me, cherry has no odor. But I have a bad nose. Cherry and maple have very different colors on a newly planed surface. Take a few swipes with a handplane and you can tell them apart.
Try cleaning a piece up well, mask one half with cardboard or something and lay it in the sun forises a half hour. If it's cherry, the Exposed side will darken significantly. Maple will not.
Looks like all are Yellow-poplar, well aged. First board is mainly heartwood, and the green ages to a brown with time.
All of it is poplar. The dark is heartwood, light is sapwood. The heartwood can be anything from green to purple to to brown.
Mills and paints well/frequently used in painted furniture, painted cabinet doors, etc.
In furnituremaking, main use is as a secondary wood for drawers, dividers, backs etc.
This forum post is now archived. Commenting has been disabled