Absolute beginner here in Southeast VA. This is my first post in this great community.
I have a small home with no room for a shop (no garage or basement) and have been looking for ways to get into woodwork, given my limitations. I have a few power tools (drill press, router and table, miter saw) but don’t really use them much on account of they don’t have a permanent home at my house.
I thought I could work in the shed out back but it turns out that it’s not moisture sealed. It’s actually just a walled off car port with a dirt floor that was built before I moved here. I brought home my new drill press and within the week, the table was showing rust. I cleaned it up and brought it inside, and cursed my misfortune.
I’d like to eventually build tables, but that’s a long way off. Im starting with small projects like tea boxes or gifts.
Help me out gals and guys!
Replies
Have you looked for community workshops in your area? There is usually a monthly fee. Experienced woodworkers are usually available to give orientation classes before using machines or to give you pointers as you work. If there is no community workshop nearby, you could look for woodworking clubs and classes where access to workshop space may be available.
Don't be discouraged. Lots can be accomplished in a small space. Years ago, I did my woodworking on a second floor apartment balcony using a Workmate and hand-held power tools.
For inspiration, check out this YouTube video called: My 95 SQFT Apartment Workshop
https://www.youtube.com/watch?v=02CscUIE8FE&t=52s
It can be done!
Mike
Find a friend with a little extra space? It’s a pain to go there but for example, I have a friend with a lift in his shop so when I need to do something to my car or truck, I can drive out there and use it. Takes a good friend though :)
I managed to build a tool chest (C Schwartz Anarchist tool chest) on my living room table.
I bought a sjoberg small vice, and was clamping it to the table and did my work there. Been using hand tools only, but i guess few power tools wont hurt !
I do hand tools as well. You can really work in small spaces.
What is the possibility of making improvements on the carport to make it a suitable workspace? If all it needs is being waterproofed, insulation, and a floor, that should be doable by the average woodworker.
I bought a 10' x 16' shed that they brought in on a trailer and set up on blocks. Not the cheapest but it gave me a starting point. I have been acquiring tools some used some new over the last two years. I now have a drill press, miter saw, table saw, bandsaw, router, jointer and planer. I have just run power after a year and a half of drop cord power. I now realize it is to small but to save the budget I am putting the miter saw & stand into storage to see how I adapt. It is a slow process so take one thing at a time to see what you can improve. I don't know if you can jack up the carport or trim the bottom of the walls and pour a concrete floor but that would really cut back on the moisture coming out of the earthen floor. You may even want to extend that pad outside for an outdoor space to work or expand later. I often move my table saw outside to make room or work longer boards & sheet goods.
Woah, I love all of the responses! You all are great! I knew I made the right move asking this awesome community.
There is a makerspace near me but my work hours prevent me from being able to go often enough while it's open to justify the monthly cost. Great idea, though!
The video linked is pretty amazing! I'm inspired by his custom solutions to space limitations and the dust management on his miter saw setup is pretty clever!
My sister has a decent sized garage I could use but my brother in law is using it for his roofing business - otherwise, that'd be a perfect solution! Maybe I can rent out a small corner for my tools...
I think I'm going to go the hand tool rout and work mostly on a small table in my 'dining room' (we eat our meals at a table in the den). I just need to build / buy a workbench that fits the space.
I've been considering how to improve the carport to fit my needs and I love the idea of pouring a concrete floor and then even adding a pad outside. I'm afraid the port is too old and poorly built to function long-term as a workshop. I'm concerned that it wouldn't last long enough to last the time / money I put into it.
I'm planning on building a detached 4 car garage with loft space for game nights and an electric car charging station. That project is a couple of years down the road. Half of the garage will be reserved for my workshop, so I'll have room to expand into, eventually.
These suggestions are all so great and I'm so grateful for the replies (and future responses I'm going to get). You guys and gals rock!
I remember seeing an article about a guy who lived in an apartment and had a closet with a window in it. I remember a picture of a piece of lumber sticking out the window. Another option is to get a tool chest on wheels (Craftsman sell several sizes) with a wood top on it. Maybe you can put it in a closet and wheel it out when you want.
I posted a response thanking you all for the awesome replies, and even got an email saying that I had posted it, but I don't see it on here. So, one more time, thank you all so much! I love all of the ideas. Some of them I can do, some of them I'm not able to. I think I'm going to start off with a custom built workbench in my house and work with hand tools. My carport is too old and I don't think it's structurally ready for a remodel. In a couple of years, I intend to build a 4 car garage with a loft. My and my wife's cars will go in half, my workshop in the other and our game night stuff up in the loft. Thanks so much for the awesome feedback, gals and guys! Keep it coming, I think this is a great discussion so far!
Don't get discouraged and a lot can be accomplished within a small space.
Just one year ago I take a class for few days and than leave it. But now I'm so much interested in it and looking forward to learn how handled machine well.
You're making me feel like my 13' x 24' space is huge! :)
I'm using the house-end of an attached, oversized two car garage. I hung plastic sheets between the shop and the cars in an effort to hold in a tiny bit of heat int he winters, and it also helps keep my tools hidden from the street when the garage door is open. All I can say beyond that is, hand tools notwithstanding, get lots of lighting and outlets!
My wife has been promising me that the next house we buy would have a shop... Since we got married (and I gave up my home with a shop). Because I have had no dedicated shop space, I've done mostly onsite work.
I was born and raised in Virginia, so I do know the struggle of rust and tools! Holy cow, do I know. But, I spent years taking tools in and out of the house to work outside in the driveway, or backyard. I bought a table saw with a rolling stand, used a small portable router table, never got a big bandsaw, used handheld power tools and made jigs, all of it. It was frustrating at times, but I made a living at it and, more importantly, continued my love of woodworking.
When we made our last move, my plan was to probably find a shop away form home. I'm getting too old and broken to keep working on jobsites. I also wanted to do more fine woodworking, build furniture and guitars again, start carving again, etc. However, I have lucked into a garage space that is now a dedicated shop. It's been a real pleasure... But, it was never truly a requirement. It's made it easier to do a lot of things, but I built a lotta stuff dragging stuff in and out of the house.
Good luck and enjoy the ride!
Here's an option that might not have been mentioned. When I was starting out, I enrolled in a local community college that had an excellent woodworking program and took basic entry level class one night a week. I had no intention to make it a career, but wanted access to the shop and to learn. It was very inexpensive, had professional shop level equipment, I learned safety, techniques, and which tools would be helpful for my eventual shop. After a few semesters, I kicked out the cars and started to turn my garage into a wood shop. I still consider going back when I can find the time to commit to a schedule again.
This forum post is now archived. Commenting has been disabled