Ask the Experts Archive Archives - Page 9 of 16

What safety features are available for cut-off saws? Where can I find more information? Thanks.

I thought I was set. I read William Duckworth's review of 8 inch routers in issue 180 and called Grizzly to order. Unfortunately they have changed their model numbers and…

I'm looking to build some spiral library steps. I seem to have trouble finding any info on these. I have 10' ceiling and I think the post needs to be…

I'm currently trying to build a wood cylinder for a pedestal table. <!----><!----><!----> <!----> <!----> I have a few issues:<!----><!----> <!----> <!----> 1.      I’m trying to determine the angle on my table…

I need to inlay 1/16 Holly into cherry.  What do I use to create the groove (dado) for the inlay.  I usually use a router but I cannot find a…

hello. I am working only with hand tools. When making a dovetailed carcass and rabbeting the back, should the dovetails be cut first or the rabbet. Also, when the rabbet…

I am a relatively new woodturner.  I would like to make some key chain fobs out of pen blanks cut to half their length (about 3").  However, my centers are…

is there anywhere on the web that you can buy square plugs or learn to make them I have a big fireplace to do and I will need quite a…

I just started doing woodworking for a living in January and have stayed relatively busy since then. Mostly bookcases, but I have just completed a small Queen Anne desk. And…

Hello.  I have some old 1/32" thick walnut venner (43 X 10") that I plan to apply using a vacuum press.  Using Tom Schrunk's advice from his article in FW…