Finishing Archives - Page 769 of 856

Wiping varnish over tung oil?
February 16, 2001

* I have a cherry table on which I've put three coats of pure tung oil Because the tung oil offers so little protection from scratches, I was thinking that…
Wiping varnish over tung oil?
February 16, 2001

* I have a cherry table on which I've put three coats of pure tung oil Because the tung oil offers so little protection from scratches, I was thinking that…
Saving Shellac–Will this work??
February 15, 2001

* Since shellac has a limited shelf life once mixed, could the shellac be preserved by pouring the mixed shellac out on a sheet of plastic and allow the alcohol…
Saving Shellac–Will this work??
February 15, 2001

* Since shellac has a limited shelf life once mixed, could the shellac be preserved by pouring the mixed shellac out on a sheet of plastic and allow the alcohol…
Polymerized Tung Oil – feedback please
February 15, 2001

* I am building a set a kitchen chairs in cherry and maple and would like to try the pure Polymerized Tung Oils that are available from Sutherland Wells (Garrett…
Polymerized Tung Oil – feedback please
February 15, 2001

* I am building a set a kitchen chairs in cherry and maple and would like to try the pure Polymerized Tung Oils that are available from Sutherland Wells (Garrett…
Overlapped Stain Problem on Hardwood …
February 14, 2001

* Like an idiot, I stained my newly installed Oak h/w floor by staining with the grain for about two feet, then going at a right anglr to the planks…
Overlapped Stain Problem on Hardwood …
February 14, 2001

* Like an idiot, I stained my newly installed Oak h/w floor by staining with the grain for about two feet, then going at a right anglr to the planks…
staining ash
February 14, 2001

* I don't usually use stains very often as I prefer the look of the natural wood with a clearcoat, but in the past I have noticed that ash doesn't…
staining ash
February 14, 2001

* I don't usually use stains very often as I prefer the look of the natural wood with a clearcoat, but in the past I have noticed that ash doesn't…

Page 769 of 856 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Finishing Archives - Page 769 of 856

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.