Finishing Archives - Page 838 of 855

Finish for mahogany patio chairs
November 1, 1999

* I've put two coats of boiled linseed oil cut about 30% with turpentine on the chairs so far. Is anything alse needed? The chairs may occasionally get wet.
Finish for mahogany patio chairs
November 1, 1999

* I've put two coats of boiled linseed oil cut about 30% with turpentine on the chairs so far. Is anything alse needed? The chairs may occasionally get wet.
When to apply sanding sealer?
October 29, 1999

* I have been useing a solvent bassed stain applied after applying a sanding sealer. I am thinking about switching to a water bassed sealer. I am confused however, when…
When to apply sanding sealer?
October 29, 1999

* I have been useing a solvent bassed stain applied after applying a sanding sealer. I am thinking about switching to a water bassed sealer. I am confused however, when…
Finish for European Beech
October 28, 1999

* I am making a mirror frame in steamed European Beech that will be situated in a bathroon that is prone to condensation. I considered using AC lacquer but discarded…
Finish for European Beech
October 28, 1999

* I am making a mirror frame in steamed European Beech that will be situated in a bathroon that is prone to condensation. I considered using AC lacquer but discarded…
messed up, need advice
October 19, 1999

* After two coats of lacquer I rubbed with compound and cut right through the lacquer, then waxed. I'd like to re-do and wonder if I can clean, coat with…
messed up, need advice
October 19, 1999

* After two coats of lacquer I rubbed with compound and cut right through the lacquer, then waxed. I'd like to re-do and wonder if I can clean, coat with…
Piano finish repair
October 17, 1999

* For a piano finish damamged by sunlight - what's the best way to smooth it without doing a full refinishing? I've thought of 0000 steel wool and rubbing oil,…
Piano finish repair
October 17, 1999

* For a piano finish damamged by sunlight - what's the best way to smooth it without doing a full refinishing? I've thought of 0000 steel wool and rubbing oil,…

Page 838 of 855 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Finishing Archives - Page 838 of 855

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.