Gary Rogowski Archives - Page 38 of 43

Want to bend 14" x3/4" black walnut boards 6' long on a 24" radius on one end. If I joint 2 boards to get 14" with biscuits are they still…

I am making a bed for my daughter. The head and foot boards have beadboard and I am using beadboard sheet. I need to attach the beadboard within the unassembled…

Gary: I'm making a small chest and would like to dovetail the top drawer rail as you did.  I've had no trouble cutting the tail, but lots of problems with…

last week I put a question about how to attach legs for a dining tabletop without the use of rails. unfortunately there has not been any reply yet. will it come?

good day,   I've got a project for a large dining table to be made out of solid oak with four heavy legs (9 x9 c/m) at the far corners. the dimensions…

Hi, Attached are two photos of a Table David Marks made. http://www.diynetwork.com/diy/ww_tables/article/0,2049,DIY_14446_3877238,00.html It's made from 2" thick solid maple. The top is 14" wide & 48" long. The legs are…

Sir;   I am a Woodworking teacher for Los Angeles City Schools. Some of our students want to bend a piece of 3/4 inch thick maple, 22 inches long and…

I would like to make raised panels with a small (1/8?) bead wrapped around all four sides of the field.I did this once on a cherry panel with a scratch…

Hello Gary; First off, I want to thank you for all your advice. I have read your articles and watched your short video clips and they have been invaluable. My…

Gary, In the recent FWW issue the Country Hutch that was built had  glass doors. The other day while re-reading the article I saw something that made me wonder. The…