General Discussion Archives - Page 2162 of 2282

Mortising
August 24, 2002

Need some experience help. I have used three methods for cutting mortises. They are 1) router table, 2) mortising bit and chisel in a drill press and 3) hand cutting. I…
routing curly maple
August 24, 2002

Greetings. I need to rout an ogee edge onto some curly maple stock for a picture frame and wondered if there were any tricks to doing it smoothly (e.g., feed…
question about tools
August 24, 2002

can anyone out there advise me is a millers falls no.100 push drill a part of the "buck rogers" line of tools? my neighbor's husband ,a carpenter of many years…
Tablesaw extensions
August 24, 2002

Hello, I am thinking of building a table extension for my contractor tablesaw. But I'm not sure what material to build it out of... Plywood? I was also thinking about…
Need bolts for antique bed
August 24, 2002

Hello, I have a need to attach the footboard and headboard from a French antique bed to an existing metal bed frame. The antique bed is a full size vs queen size…
Buying a bandsaw
August 24, 2002

Hey Folks, Anybody have any advice regarding buying a large 20-24" bandsaw? I looked at a Grizzly 24" recently which had a huge amount of blade wobble. Since the owner…
More on restoring hand planes
August 23, 2002

I am in the process of restoring an old Bailey #3 and could use some help and advice. Completely disassembled the plane, honed bottom, etc - I bought and honed/sharpened…
Help with Boice Crane blade size
August 23, 2002

Hi All, the handle is actually the Russian word for vacuum tube. I do restoration and building of hi-fi and instrument amplifiers as well as hand made instruments. (everyone always…
Pencil Post Bed
August 23, 2002

I have promised a pencil post bed for my daughters. I've read a few different techniques such as bandsaw, jointer and tablesaw methods for tapering the octagonal posts. Seems to…
DESIGN SOFTWARE
August 23, 2002

I'M LOOKING FOR SOME SOFTWARE TO ASSIST ME IN DESIGNING & GENERATING DRAWINGS OF FURNITURE THAT I MAKE. HAS ANYBODY HAVE EXPERIENCE WITH ANY? I AM CURRENTLY LOOKING AT TURBO-CAD STANDARD @…

Page 2162 of 2282 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

General Discussion Archives - Page 2162 of 2282

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.