General Discussion Archives - Page 8 of 2282

I've got another bent lamination project coming up and am thinking about the adhesive to use.  In the past I've used plastic resin glue (urea formaldehyde wood glue) as it…

I have a hand-made antique drawer unit that needs re-gluing. The stretchers are mortised and pinned to the legs.  On other pieces in the past I have drilled out the…

I broke the fence clamping body on my older JET table saw so I need to find something compatible:  08472R stock numberJWTS-10CW2-LFR model numberI'm just coming to the conclusion that…

Made drawers for a cabinet project and I'm trying to decide the best way to fasten the faces that are 4/4 cherry to the Baltic birch sides while allowing for…

I build bedroom furniture, desks, credenzas, pretty much whatever the client wants. I have traditionally sprayed solvent lacquers for the speed of drying and how well the finish goes down…

Hi!Ive been planning on making a zero clearance fence for my miter saw, similar to this:https://ibuildit.ca/projects/making-a-smaller-zero-clearance-miter-saw-fence/I'm planning to add a tape measure and t track with flip stop at the…

Hi all, I have two projects with Tung oil. One is a beech wood kitchen worktop, where I've did some testing and can apply the pure tung oil with it…

Hi,I want to build a new front door, of good quality but on a budget.It will need to be 800mm wide and 2100mm high.There are lots of old oak tables…

I have a coffee table that has 1 leg missing it’s Brad nut. It looks like someone had used epoxy to try and fix it prior but it wrenched out. I…

I'm crazy for even considering it, right?  It's the 86 year old table.   I just cleaned it and witnessed all the wear.  MY original plan was to clean it, wax…