Jigs, Fixtures, Tips & Tricks Archives - Page 16 of 69

I am thinking about doing some string inlay on a corner desk I'm building out of white oak. The corner section in particular, will have some broad cross grain areas.…

I’m new to more advanced word working and am going to try to get started with dovetail joints. I’m starting with some “tables” that will be for a model railroad.…

In the video at https://www.finewoodworking.com/2012/08/07/5-mill-custom-crown-molding, Jeff Miller demonstrated a technique that allows one to cut a cylindrical section out of stock by passing the stock across a table saw blade at…

I am having trouble drilling a through hole with 2 pieces of wood that I want to put a dowel through. I made a lap joint and glued it and…

I have a cherry board with a serious crackin one end. the crack is from the crotch of the tree. I want to use the whole board as part of…

I am making two headboards for  slat beds.  Slats are 2 inches wide.  The three inch posts are 35 inches apart. I am having trouble figuring out the identical spacing…

Zuffa Home before Office Furniture Montreal it is vital to set apart amongst the various spaces of the work environment, every having to be great provided in a prominent way.…

I don't have room for a jointer so am trying to get a perfect edge for glueups using my contractor saw and a crosscut sled.  Gives me a great edge…

I have an active Youtube Woodworking channel that I post on each week. My goal is to share a tip, technique, or tool that has helped me inprove my woodworking…

Ron demonstrates an elegant air hose repair that will work on any size air hose and many other types of repairs as well. Video: https://www.youtube.com/watch?v=Ju70NTLSRj0