Jigs, Fixtures, Tips & Tricks Archives - Page 20 of 69

oval tabletop
December 10, 2012

Hi folks, Does anyone have a tip on making an oval tabletop? Size: 68" wide, by 74" long. I'm thinking the must be a jig or a method to create…
segmented bowl turning
December 8, 2012

I have been turning bowls for a number of years and have started to do segmented bowls. My problem is with the alignment of the segmented rings. How do you…
Centering or adjusting a drill press for drilling angled holes
November 28, 2012

I am looking for advise or a technique to center up a drill press for drilling angled holes. Specifically I needed to drill four angled holes in a row along…
convex curve in box sides
November 28, 2012

Making a jewelery box that is 15" long (front & back) by 7' inches wide (the sides) by 6" tall (including the top). I want all 4 sides (2 sides, front…
Routing a sloping and curved groove
November 20, 2012

Hi, I have been racking my brain to try and figure out how to ceate a templete.
Other manner to insert a marquetry in a wood piece?
November 13, 2012

Bonjour! This is my first post ! I use this jig to insert a marquetry in a wood piece http://www.leevalley.com/fr/Wood/page.aspx?p=41779&cat=1,101,43000,51208&ap=1
honeycomb torsion box without vacuum press
October 30, 2012

I have a couple of applications in my home for some custom table tops (a desk, and a sewing center) and have been thinking of using the torsion box type…
Routing acrylic
October 27, 2012

I need to round over the edge of a piece of acryclic to remove the sharp edge. Am looking for advice on feed/speed/technique for this. Also, can anybody suggest an…
Gap Filling Glue, what brand?
October 22, 2012

I recently watched a band saw techniques video where the demonstrator showed using the band saw for an interior cut then backing out of the access cut. The access cut…
Curved Miters
October 13, 2012

I am trying to make a picture frame, but instead of a standard miter joint (which I will spine) I want my joint to have sort of a curvy, s-like…

Page 20 of 69 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Jigs, Fixtures, Tips & Tricks Archives - Page 20 of 69

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.