Jigs, Fixtures, Tips & Tricks Archives - Page 40 of 69

Starting small #0 wood screws
December 4, 2008

Hi all. I am looking for an easy method for starting small #0 brass slotted wood screws. I have just finished installing 12 of these little devils mounting two hinges…
Well seasoned cherry warping
December 4, 2008

Howdy folks, mostly retired old coot broadcast engineer here, in the process of building an entertainment center that is about 95% solid cherry. The design has an equipment box mounted…
Use of Gorilla glue for lamination
December 3, 2008

There have been many posts on laminating, accompanied with information on which glues to use. Many people recommend NOT using Gorilla glue because of the excessive foaming. My early experiences…
Anyone built a panel press TABLE?
November 30, 2008

I've been working with a big vacuum press bag that is open at one end. When I have to press many panels at once, or a large panel, it is…
straight edge
November 27, 2008

Been looking for a straight edge to use with my circular saws cutting at least up to 8', 12' would be better. Disassembly good for 4' and easier transport; 12'…
TS Sled
November 26, 2008

Hey Guys and Gals, I am going to be building a sled for my TS during the Turkey weekend and wanted some neat ideas. Please respond to this with advice…
Need outfeed support help.
November 25, 2008

Does anyone have a concept or plans for an outfeed support extension for a contractor's table saw (I have a Powermatic 64)? I need it to be easily attached and…
dovetail jig
November 20, 2008

I need a dovetail jig for my shop and have concdered the Leigh D4R jig. Is this a good choise Ken Edited 11/19/2008 10:14 pm ET by artw
router jig
November 17, 2008

i once saw, and thought i had saved in my favorites, a plan for a router jig in which the router rested on a small platform attached to two pipes…
First Kreg Jig Experience
November 13, 2008

Ok, so I bought a Kreg jig to join some exterior window casings with stainless hardware and I noticed that the screw heads do not sit flush in the pocket…

Page 40 of 69 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Jigs, Fixtures, Tips & Tricks Archives - Page 40 of 69

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.