Jigs, Fixtures, Tips & Tricks Archives - Page 50 of 69

Quick steaming solution and cheep!
October 17, 2007

Early this morning (I'm up working in my shop about 3 AM when not babysitting).. No, I do not sleep well.. But.. I get along.. Yesterday after babysitting I glued…
Only with Jorgies
October 9, 2007

View Image View Image View Image View Image View Image _________________ “When we build, let us think that we build forever. Let it not be for present delight nor for…
Current source of Fasttrak Fence?
October 7, 2007

Hi, I have a 4' section of a Fastrak fence along with a stop that I use on my miter saw. It works really well but I'm rebuilding my miter…
Scribe-fitting Difficult Profiles
October 5, 2007

Ever have to scribe fit a kitchen cabinet to fit a wavy and out-of-plumb wall? How about fitting a bulkhead or partition-wall panel into the inside hull of a yacht…
routing
September 20, 2007

I have a molding I would like to make, about 2" x 1 1/2". It has a roundover at the top with an ogee at a 45 degree angle and…
Bandsaw crosscut
September 19, 2007

With the recent article on saws, a tempestive tip may not come amiss. My saw will allow just under 8" height and 13" long, so to crosscut at more than 13" a…
Leigh FMT jig
September 16, 2007

For anyone interested, the price has come down, my row boat came in, so I chanced my luck with the imperial version last friday. Everything aside from a hex…
table saw tenon spacers
August 23, 2007

I've read several times in FWW about setting up two blades on a table saw to cut tenons. Each time, the author gets spacers made from a "local machine shop",…
How square?
August 22, 2007

I've just made a cross-cutting sled for my Unisaw. However, I'm having a tough time getting it, EXACTLY, square. At the end of an 18' cut, I'm off 1/64". Considering wood…
cove cutting
August 19, 2007

I need to create some cove crown molding in soft maple. I don't want to use the table saw method because of burning and all the sanding and scraping. I…

Page 50 of 69 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Jigs, Fixtures, Tips & Tricks Archives - Page 50 of 69

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.