John White Archives - Page 13 of 81

EXCLUDE

Table saw blade tilt issue
January 30, 2009

I have a Delta hybrid cabinet saw that I purchased used. I was fine tuning it and have run into a problem when I tilt the blade to 45 degrees…
non-coplaner infeed table
January 29, 2009

I have an old Model 60 Powermatic 8" jointer. The problem is the infeed table is not co-planer with the outfeed. It tilts away from the cutter head as much…
Jointer Problem
January 29, 2009

I am having a problem with my Jointer. The problem I am having is that the work piece is high in the centre. I think the problem started after I…
joiner/planer
January 29, 2009

I'm looking for opinions on 12 inch joiner/planner combo tools. I've seen a few articles, but need more info. I've seen articles by Roland Johnson, but would like to ask…
resaw setup
January 27, 2009

John, 2 questions: 1. I have the Delta 14" saw with 3/4 hp and 1/2" 3tpi blade and no riser. I set it up using Michael Fortune's "Five Tips for…
multiple air compressors
January 26, 2009

I want to do a small scale bit of sand blasting, and I have three small compressors- a 2 HP, a 1 HP, and a 3/4 HP. Can I safely pump…
Drill Press
January 25, 2009

John, I have owned a Delta 17-900 drill press for about 20 years. I recently replaced the chuck and arbor. While doing so, I noticed that the quill and spindle…
New Fangled work bench
January 23, 2009

I'm considering building the pipe clamp workbench and have a few questions. Does the front top portion (~3=") provide enough support to resist downward pressure from tasks like cutting mortises…
Can a mortiser double as a drill press?
January 21, 2009

Can benchtop mortisers be used without the chisels and double as a drill press for certain applications? I have very limited space and don't have room for 2 heavy machines. I do have…
Best Ever Outfeed Table
January 21, 2009

John, After reading your article on the best ever outfeed table I was wondering what procedure/sequence you used to screw the table top to the sub top from the underside.…

Page 13 of 81 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

John White Archives - Page 13 of 81

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.