John White Archives - Page 39 of 81

EXCLUDE

Louver Layout
March 7, 2008

I'd like some help on layout for a louvered panel. the louvers will be fixed. Thanks TDF
NF Workbench Questions
March 6, 2008

I'm about to build your NF Workbench and wanted to bounce several modification ideas off you. 1st -insert dowels in the long stretcher and the end frames so that the…
head lock failure on band saw
March 4, 2008

I have a craftsman 14" bandsaw with tilting head, and the lock is starting to fail allowing the head to tilt when using the saw. It is a slow change…
Elliptical frame and taper
March 4, 2008

I am trying to duplicate an elliptical picture frame which has a uniform cross section that slopes so that the inside of the frame is thinner than the outside. Any…
Flat bottom cut with table saw blade
March 4, 2008

I want to cut flat-bottomed slots for keys in mitered box joints I would like the slots to be just the width of a table saw blade. Which blade grind pattern…
Noisy Zero Clereance Insert
March 2, 2008

I just installed a store bought zero clearance insert in my table saw and it is pretty noisy, compared to the non zero clearance insert it came with. The higher…
benchtop planer slipping
March 2, 2008

I have an older model Delta benchtop planer (22-540) that recently is having trouble pulling the stock into and out of the planer. I have to "force feed" the piece…
sticker shadow
March 1, 2008

A local lumber mill, (very reputable), has 100 BdFt lots of 5/4 tiger maple with sticker shadow roughly ever 2'. They are offering this lumber at a 75- 80% discount…
Sharpening
February 28, 2008

How do I tell if a stone is water or oil. I have a couple of Alum. oxide stones in boxes that don't say and a couple of Henry Taylor…
Lath Purchase for the long term
February 27, 2008

Hello I am going to puechase a wood lathe for myself and my son. We are looking to purchase a lath for long term use. The Craftex 2 horsepower --…

Page 39 of 81 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

John White Archives - Page 39 of 81

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.