John White Archives - Page 7 of 81

EXCLUDE

Is it OK to do this?
September 5, 2010

I need to separate two halves of some thin molding, and take off 3/16 while doing it. Two 24 tooth ripping blades for the tablesaw together equals a 3/16 kerf. …
Band Saw Riser Block and alignment
September 3, 2010

I'd like to add a riser block to my 14" Delta bandsaw so I can resaw wider pieces of wood. But it's perfectly aligned right now and although the width…
DeWalt DP Radial arm
September 2, 2010

Just picked up a 1947 DeWalt DP radial arm and I'm just wondering if there are any quirks in the "beast" I should be mindfull of ? What are your…
moldings
August 30, 2010

i'm making the kitchen cabinets by norm abram featured in issue 196 of fine woodworking. any idea where i can purchase the router bit norm used to make the 3/4…
Bandsaw Setup
August 17, 2010

I recently resurrected an old 28-200 Delta/Rockwell Bandsaw and began to clean up and refurbish. I have relaced blade guide blocks and wheel tires and mounted new saw blades but…
Lube on jointer ways
August 17, 2010

John, your book on maintaining shop machines has been very helpful to me. I'm currently rebuilding an 8" jointer and have used your book the whole way through. My question…
Band saw burning
August 17, 2010

I have an old Delta bandsaw and have problems with burning on one side of the cut. I have changed blades, fiddled with the roller behind the blade, etc. and…
Ridgid planer feed speed
August 12, 2010

John, I bought a Ridgid 13 inch portable planer last year (TP1300), and like it pretty well so far. But the feed speed of 26 feet per minute seems to…
glueing-up
August 12, 2010

Dear John; When staining wood before glue-up do you cover area where , (example) rail & post get glued or leave it open ? Would stain interfer with glue…
1/2″ drill, messy
August 3, 2010

While going through the garage, I found an older 1/2" corded drill. This drill apparently was stored away a few years ago. It was in it's case, but someone left…

Page 7 of 81 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

John White Archives - Page 7 of 81

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.