John White Archives - Page 77 of 81

EXCLUDE

Exterior wood shutters
May 17, 2006

My home was built in south Florida early 1950. It originally had large panel (3x3) on average solid shutters made of what I remember to be either solid wood or…
crown/cove moulding
May 16, 2006

hello all i am going to make my own cove moulding and i am not sure what angle to back cut the moulding. what is the angle on crown moulding.…
installing a Delta Unifence to Powmtc 66
May 15, 2006

I have purchaced an older Powermatic 66 and want to attach my Delta 50" Unifence. I need some advice as to the best method to use. Thanks so much…
WOOD TABLE SAW TOP REPLACEMENT
May 11, 2006

I KNOW THIS IS A SACRELIGOUS QUESTION BUT-- CAN YOU OR HAVE YOU EVER SEEN/HEARD OF ANY ONE MAKING A REPLACEMENT TOP FOR A TABLE SAW OUT OF WOOD?
adhesive for disc sander
May 10, 2006

Can you recommend a good adhesive for my 16" disc sander. I have some old unused discs that seem to have a sticky back but not enough tack. I tried…
Dust collection duct layouts
May 10, 2006

After April's discussion I bought a Delta 50-760 and installed in my shop. You need a picture but I'll try and describe it. The ductwork is connected to the collector…
Accurate tablesaw box joint jig
May 8, 2006

A recent project requires construction of a lattice work milled from 3/4" x 1 1/2" jatoba, 3/4"x3/4" dadoes spaced 3/4" apart, pieces to interlock perpendicularly to form 3'0 x1'0 treads…
Bandsaw Vibration / Bent Wheel?
May 8, 2006

I have a 20+ year old Delta 14" w/ riser (purchased new). Recently decided on an overhaul. New tires, link belt, upgraded drive pulleys, re-aligned pulley co planarity, new thrust bearings,…
Very Best 10″ or 12″ dual slide compound
May 5, 2006

Hey Alan, What do you consider the very best dual 10" or 12" slide compound saw? I'm currently using the Hitachi 10" but the blade continues to run when…
Removing Lower Band saw wheel
May 2, 2006

I think I need to replace the lower wheel bearings on my Ridgid bandsaw lower wheel. I detect (feel with my hand on the table top) a periodic (not continuous)…

Page 77 of 81 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

John White Archives - Page 77 of 81

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.