Joinery Archives - Page 29 of 299

Hi, I am ready to do the glue-up on the base of a large table i am making made with only mortice-and-tenon joints. Conventional wisdom dictates i would require 8…

So I am looking into re-creating this beautiful table, but I can't quite figure out how the legs would join to the top.  Is there anybody out there that can…

I plan to use Unibond 800 to glue up a large lazy susan made of Alaskan Yellow Cedar. I would appreciate opinions on this approach since I have never tried a…

Has anyone used this or know anything about it: http://www.garrettwade.com/special-slo-set-glue/p/62J04.01/ User reviews are good. But the product description doesn't say much. For a white or yellow glue, it has a…

I know that long grain to long grain glue ups are the strongest (say "100"), and end grain to end grain are weak (say "0"). Does anyone know how relatively…

Hi, I'm kind of DIY Carpenter, with not so much experience. I'm designing a solid and beefy kitchen table that will have of course a solid thick table top. I'm…

I have a question that I don't recall ever seeing addressed before.  I've recently made a number of small boxes using fingerjoints cut with Freud's box cutting set.  Even though…

I'm trying to find a source to purchase 120 feet every 6 months of 14 degree - 1" x 1" oak dovetail key stock. Is there a supplier for this…

Does anyone out there have any tips, tricks, how to videos on glueing up angled raised panels for a stairwell?   Chip

I've made a knock-down base held by a half-lap joint, topping the legs with square tenons.  The top is square and the stretchers are at 90 degrees.  How do I…