Joinery Archives - Page 3 of 299

Cherry table top
February 29, 2024

Several years ago took some KD dried cherry stock that had been on the rack in my shop for a few years. (my shop is on Cape Cod, and not…
Large Cabinet Doors
February 26, 2024

Hi,I have a question I would appreciate some feedback and opinions on. I'm currently building a large cabinet system with 6 fairly significantly sized cabinet doors. The cabinet system is…
Angled mortise and tenon with hand tools
February 18, 2024

Hello,I will try to build a table using angled mortise and tenon joint, but I am not sure what would be the best way to cut it, since I do…
How to cut angled mortises?
January 24, 2024

Friends,I would very much appreciate any tips or references on good "how to" articles or videos on cutting angled mortises. I have searched on line, but did not find much…
Strong joinery for curved legs attached to the side of a carcas?
January 14, 2024

I'm unsure which joinery methods would provide the best strength between a curved tapered maple leg interfacing with a 3/4" carcass made of mahogany. There will be about a 3"…
project photo highlighting joinery guide
January 11, 2024

Does anyone know where we can see a full photo of the desk/table, or whatever is the project featured to highlight the joinery guide this month? It has beautiful bridal…
Island bench reinforcement
January 5, 2024

Hi all I have a grante island bench. On one side of the bench I have 470mm overhang with a 1430mm span. There are full length support either end of the…
Vintage Join
November 14, 2023

I just acquired this solid Oak table which is too short to be a desk and too tall to be a coffee table. I would like to repurpose it into…
Flattening and Edge-jointing for desktop glue-up
October 16, 2023

I am making a desk from very special wood that I won't ever have again, so the pressure is on to do it right. One board that I'll use for…
How best to attach a massive table leg to top?
October 8, 2023

I have a 120cm x 70 cm by 4cm thick coffee table top, and want to attach two massive 35cm x 50cm x 8cm legs underneath. See picture.What would be…

Page 3 of 299 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Joinery Archives - Page 3 of 299

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.