Joinery Archives - Page 48 of 299

Domino joinery for sofa
February 2, 2010

I am making a mission style settle and was wondering about using the festool floating tenons rather than mortise and tenon. any thoughts if this is good idea for a…
Curved Joinery
January 29, 2010

Howdy,I originally posted this to Assign an Expert for Me,but from what I now understand that does not exist any more so here it is in Joinery.I have been working…
How to shape tight radius narrow pieces
January 29, 2010

I am designing a headboard that will incorporate 7 or 8 panels, each panel about 8" - 9" wide and arched at the top to match the tightly arched grain…
Raised seam on jointed panels
January 29, 2010

I often use jointed boards and biscuits when making panels or table tops from solid wood. After fine sanding to 400 grit and finishing with a an oil/varnish finish, in…
splayed bevels for trays and boxes
January 27, 2010

I have checked both Ellis and Joyce (and almost everywhere else!) and can find scant information on this technique. It seems to me that E. and J. are just a…
Ogee Feet Revisited
January 25, 2010

Been doin' some ogee feet and thought I'd post a few photos. I still do my rough profile on the tablesaw and finish up with the planes. I do the…
Beveled Dado
January 21, 2010

For a new commission I need to cut beveled dados for a shelf that will fit into leg panels that will stand at 85 degrees - a 5 degree slant.…
Tenon Dimensions
January 21, 2010

I gather that the thickness of a tenon should be no less than 1/3 the thickness of the stock, however, what is the normal relationship of the length of the…
Incra vs. JessEm Complete Super LS XL Router System? Table, Lift, Fence, Miter, Total Package?
January 20, 2010

Router Issue Solved: Now purchased PC7518 3.25HP (thanks to your feedback). Must decide which total full router table, lift, fence, miter, stops, Best Solution by Incra LS Package vs. JessEm,…
Hinge choice
January 19, 2010

Hi, I have made a large cupboard for the kitchen, to contain the built-in fridge. It is a traditional design, using face frames and framee and panel doors, hung on…

Page 48 of 299 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Joinery Archives - Page 48 of 299

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.