Joinery Archives - Page 54 of 299

raised panel reveal (how much)
August 16, 2009

I'm making some raised panels with an ogee pattern. What is the standard (if there is such a thing) reveal for the panel from the top to where the ogee…
Epoxy Failed to Cure
August 14, 2009

Last night I glued up a dovetailed frame using West Systems 105 Epoxy with 205 hardener and microfibre thickener. I also glued and lightly clamped 2 scrap pieces. After 8…
raised panels on the router table
August 12, 2009

I'm trying to decide whether to go with a vertical raised panel bit or the horizontal design for some panels I'm doing. I'm going with a ogee pattern, so the…
Best way to attach shelf “stretcher”
August 12, 2009

What I am calling a shelf stretcher is the shelf shown in the attached picture of an ottoman. The best I can come up with is to put a 1/4"…
planing off proud dovetails
August 8, 2009

Hi Folks, I'm starting to get "into" dovetails and wonder what is the best way to clean up the ends of the pins and tails that are proud of the…
loose fitting tenons
August 7, 2009

I am currently working on a bed that is constructed with M/T joinery and I don't know how, maybe they shrank, but some of my tenons are now a loose…
Mortise and Tenon Depth – How to Achieve
August 3, 2009

I'm a novice and I'm working with 1 x 3 dimentional lumber to create frames for cabinet doors...lots of cabinet doors. Given the wood, I thought I should create a 1/4" wide…
Dining table leg corner brace
August 2, 2009

Hello all, I'm starting to design a dining room table. I'm wondering about the apron/leg junction. Do they need corner bracing? If I plan on using 3" thick legs with…
Box joints made right
July 29, 2009

No, I don't know how to make them right. I'm asking. This must be a very elementary question, but I sure cannot find the answer on my own. This is…
Kreg pockethole jig
July 29, 2009

Just recently bought a Kreg jig to make a large face frame for a kitchen island. The frame material is 2" x 3/4" tigerwood. Every joint I made caused a split in…

Page 54 of 299 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Joinery Archives - Page 54 of 299

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.