Joinery Archives - Page 76 of 299

Table top Joinery
January 17, 2008

I am going ot make a Mahogheny dining table. It will pull out at the center to accomodate expandable leaves I can use a single board- 32 " wide Honduran…
Dowels in ends of sticks
January 14, 2008

I'm repairing a fairly complicated chair, knocked it apart in order to reglue the joints. I have to replace some of the "sticks" that go between the legs, and these…
Single Entry Dovetails
January 12, 2008

I really like the look of the single entry dovetail. I cut my tails first for the record. I can cut dovetails very accurately, but I am running into a…
1/2″ Door with 1/4″ Rail and Stile Set
January 11, 2008

Hi, I am building a frame and panel door for a storage cabinet. I have the following Freud matched router bit set for Rail and Stile. http://www.rockler.com/product.cfm?page=19479 It is really…
Chair questions
January 8, 2008

Hello, Ive been wondering why on some Queen Anne/ Chippendale style chairs one rear leg looks to be cocked inwards (side ways when viewed from front). Also I see that…
Centering a Mortise
January 4, 2008

I have to make 4 m & t joints on a chair seat. Tenons I make on the table saw and have no trouble making them dead centre. For mortises…
gluing up in the cold
January 1, 2008

I need to glue up panels in basically an unheated shop, Does anyone know of a glue which works on hardwood (cherry) which will work in the 40-45 degree F…
regluing.
January 1, 2008

I hope this is the right place for this discussion.. ;-) What is the correct approach to reglueing a failed glue joint.. I built an elaborate exact scale…
Newel Post Joinery
December 31, 2007

I am making some newel posts and I want to do something more than just plain joinery. Initially box joints or dovetails popped into my head but I dont think…
Attaching Hardwood Edge to Plywood
December 30, 2007

I am planning some office tables and have some questions about technique. The table tops will be built from 3/4 cherry veneer hardwood plywood surrounded with a birdseye maple edge…

Page 76 of 299 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Joinery Archives - Page 76 of 299

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.