Power Tools and Machinery Archives - Page 108 of 1208

PC 8529 problem
July 28, 2010

Hi Everyone, I went to use my PC 8529 plunge router today which has very little time on it, and the router speed control is not functioning the router runs…
used jointer
July 26, 2010

I am looking for a used jointer. I have found a Enlon En3104 circa 1995. Has anyone had experience with this machine?
Bandsaw Purchase
July 25, 2010

I am about to purchase a new bandsaw and need some advice. I thought I had it down to the Rikon 14" with 13" resaw capacity. Then I was shown…
cutting molding while it’s still attached to wall.
July 24, 2010

I'd like to cut a piece of horizontal, floor-level molding without taking off the whole strip of molding and cutting it on my table saw. I only need to remove…
capacitor problem?
July 23, 2010

My band saw lugs and moves slowly for about 5 seconds before it kicks in to it's normal speed. It is not the belt slipping. Could it be that the…
Q re. Festool ts 55
July 21, 2010

I am looking at purchasing a ts 55 saw. I also noticed that for their tracksaw Dewalt offers a router guide that would allow me to Dewalt/ PC routers on the…
Inca 550 jointer/planer
July 20, 2010

Does anyone know the dimensions for the drive belts on the Inca 550 jointer/planer? Also, what material are these belts made from?
Role of bottom vs top bag in dust collectors
July 20, 2010

I've ordered a single-stage, single-bag dust collector that filters down to 30 microns (I'm on a budget and couldn't justify the cost of models that filter to 1-2 microns). In…
Surely I don’t have to use duct tape to hold my table saw blade in place?
July 18, 2010

I recently bought a Ryobi contractor table saw and decided to put it together today. It has a 5/8" bore and I bought a new rip blade (24 teeth) but…
Router bit modification
July 13, 2010

Hi, I have a bearing guided bit that... I want to remove the part of the body casting that held the bearing so I can use the full profile. Any…

Page 108 of 1208 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Power Tools and Machinery Archives - Page 108 of 1208

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.