Power Tools and Machinery Archives - Page 110 of 1208

The Best Router Table
June 22, 2010

My current RT leaves a 1 1/4" space between the end of the collet and the top surface of the table. This severely limits the working height of my bits. Although…
Best type of blade for finish rip cuts
June 22, 2010

Hi there I'm looking for advice on the type of blade to get for final ripping of smallish parts on the table saw. In FW 193, Mark Arnold rips small…
Arbor alignment problem
June 20, 2010

Greets...new here with a question about alignment issues on an older (Craftsman) contractor saw. I've been using it with fairly good results for years...last week the bearings went bad -…
Sharpening Carbide Blades of Cutter
June 17, 2010

My most recent purchase was a 3HP shaper. The 2 CMT shaper bits that I got with it were dull to the point of burning the wood during a cutting…
wood dust/shavings press?
June 16, 2010

Are there any reasonably simple home designs available to make a press for making briquettes out of shavings or dust created in ones work shop? All the commercial machines…
Scoring on drum sander roll
June 13, 2010

Using a 24 inch Powermatic dual drum sander I'm typically experiencing scoring/burning on one or both paper rolls after a relatively small number of passes - say between 6 and 12,…
Delta Unisaw Issue
June 13, 2010

Could someone help me with what is probably an easy diagnosis. My 1995 vintage Unisaw with magnetic starter has developed a problem in that the motor will not keep running…
contractor saw top
June 13, 2010

I have a black & decker contractors saw, the top is horribly out of level, (right side about half an inch lower than the left). If I spent the money on a…
planer hesitation
June 12, 2010

I have a Makita 2012NB 12 inch planer. I've had absolutely no trouble with it but it is now exhibing a symptom and I would like to learn about what…
Router bit shank diameter
June 12, 2010

Goodmorning, I own a palm router that I bought from UK. It has two collets, 6 and 8 mm. The question is: if I buy a router bit that has…

Page 110 of 1208 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Power Tools and Machinery Archives - Page 110 of 1208

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.