Power Tools and Machinery Archives - Page 1193 of 1207

Does anybody have any experience with these lathes. The just introduced a new model. I found the info here: http://shop.woodcraft.com/woodcraft/product_family.asp?family_id=7361&mscssid=SVXJ8VA0EEKB8PQS2C2GGNFF069L3PD1&gift=&giftID=source=novadvr Steve - in Northern California

Greetings, Has anyone installed a Biesmeyer fence on an older Rockwell/Beaver 9" table saw. It seems to me you would have to remove the original steel rods that hold the…

I am looking to buy an 8" jointer.  I had an older craftsman jointer and wore it out about a year ago.  I haven't had a jointer since.  I have seen the Grizzly…

I'm setting up a new cabinet saw with solid cast Iron wings. Table size with wings is 36 x 27. My question is....."How flat is flat"?  The table seems to…

I have a Delta 14" closed stand band saw model 28-203 with a 52-963 base. It was supplied with a 3/4hp 1725 rpm motor. I have installed the riser kit.…

I am trying to decide whether to purchase a Jet 18", Laguna 16", or MiniMax 16" Band Saw.  I am looking at this size because I want it to handle…

I'm looking for a 2" plunge (or mortising) router bit (1/4, 3/8 and 1/2 cutting diameter).  I don't own a dedicated mortiser and the 1" bits I have can't cut…

What is the difference in the grizzly left tilt saw for 895.00 and the delta saw for 1699.00. Right now i am using craftsman 3hp contractor saw with a W/XR2424fence…

At a yard sale not long ago I picked up a pair of Kunz spoke shaves, one convex and one concave.  They fellow that sold them to me said he "could…

Does anyone have exeprience with the Original Saw Company RAS?  I am interested in the 12"/13" contractor series that will cross-cut 24". I have not found any local dealers.  I…