Power Tools and Machinery Archives - Page 29 of 1207

Someone said this “might” be an early overhead pin router?? I came across a very unique machine, so to speak, a “duplicator” perhaps?? Someone adapted a router housing to it, but it…

I have an old Delta 34-670 table saw that is need of a motor tuneup (bearings in particular). Trying to disassemble this thing is just a nightmare.The pulley is pressed…

=============================================================UPDATE:  One year later.    As shown in the video, the sled is made with two runners and the runners do not have to fit snug in the table saw…

Old planer did not snipe.  Got a new planer and can't get rid of new snipe.  Using the same cleated aux sled from the old one and have adjusted and…

Hello all,Looking for some advice regarding my next lathe. Little background:  I currently have a PennState Turncrafter  Commander 12” with extended lathe bed. This is a great midi lathe for spindles…

I replaced my 35 year old contractor saw ( 24 x 22 inch table ) with a SawStop, but didn’t want to increase the floor footprint.   So which SawStop…

I have a grizzly g0715p table saw. When the blade is at a fully lowered position, it seems to be stuck. As I raise the blade though, it starts to…

So I inherited my Dad's Delta (BS100) table top bandsaw. Dad never really used it much at all. I mounted it to a cabinet with coasters and bolted it down…

Hi all, looking for someone in the know or someone who has this bandsaw to help clarify an issue.I have this bandsaw, everything on it is set up correctly (coplanar…

I am looking to upgrade my bandsaw which is a Jet 14 inch with a 3/4 Hp motor and a riser block,  a Delta knock off. It is doing ok…