Power Tools and Machinery Archives - Page 45 of 1208

https://www.youtube.com/watch?v=JNsLNJsMj0o&t=104sIt seems that there is controversy about the whole idea of blade drift. There is the thought that there really is very little drift in a new blade, one whose…

I have an older CM 14 inch 4-speed band sawI want to know:Would link belt much reduce vibration?Would converting to single speed be more direct and efficient in reducing vibration,…

I have a Rockwell 34-461 that I am working on.  The pedestal has a hole in it - looks like a hole for a large electric box (4x3.5) - picture…

I am trying to i.d. a used PSI dust collector that I am looking to buy. I have attached the only photo provided in the ad. As you can see,…

What is the ideal speed range in ft/sec to resaw hardwood 4-8 inches wide with a bandsaw?Blade 3-4 teeth per inch? 3/8" to 1/2" wide blade?Thanks

the motor on my arm saw has croakedthe saw I have is a:dewalt7749 radial saw 2.5 hp motor and uses 10" blades.normally, I would be able to fix the motor…

I do not want to rely on the thermal shut off of my old 40 plus years old induction motor RAS. It will be on a 20 amp 230 volt circuit…

In my breaker panel, the ground and the neutral are all fastened to the same metal bar. There are numerous white and bare copper wires fastened onto this bar, and…

I have two dust collectors.  One is 1.5 hp the other 2 hp, Harbor Freight , Grizzly.What is more effective for lathe dust collection, parallel or serial connection?

What is the most effective and practical means of using 1/8 shank bits on a 1/4 or 1/2 inch collet router?I need to route multiple parallel very fine line on…