Power Tools and Machinery Archives - Page 55 of 1208

I got a 14in band-saw for Christmas and used a video http://www.bing.com/videos/search?q=bandsaw+resawing&form=HDRSC3&first=1#view=detail&mid=7F0ECA7219FD85061BB87F0ECA7219FD85061BB8 for setting up the drift, by cutting free hand and using the stock to set the fence.

My bandsaw blade moves forward to back while running in other words left to right when viewed perpendicular to the blade. It is an18" Rikon about 8 yrs old.  It's…

My Bosch 1617 plunge router drops 1/16" after a minute of use. It doesn't matter what bit I use (1/4" or 1/2" collet, dovetail, dado, spiral up cut...). I thought…

What can I use a high speed grinder for if it isn't good for chisels etc? I got a slow speed grinder what are good wheel that I should get…

i am planning on buying a new tablesaw.  I am not sure if I should get a high end contractors saw or a cabinet saw.  Any information would be greatly…

I love my Dewalt 735 but it plus up in the upper chamber just below the lid.  This causes the sprockets to fill up and it stalls out the thickness…

There is a very loud vibration or nocking while the saw is running. Hello,

I have been considering purchasing Bosch's 12" Glide miter saw.  Even though it is a space saver design, it is bigger than a non-slider and I haven't yet come up…

I recently purchased and aftermarket guard and splitter for my early 1980s Unisaw.  After mounting the unit, I discovered that my blade (Forrest WW2) was positioned 1/8" too far out…

<img alt="" height="598" src="http://forums.finewoodworking.com/sites/forums.finewoodworking.com/files/attach_images/IMG_0168_