Wood and Materials Archives - Page 24 of 198

I have designed a vanity fr someone who is no longer my SO. It was suppose to be a Christmass present the first year we were going out. I want…

I am doing a lot of research on torsion boxes and the qualities associated with building with them. I am very interested in building a solid workbench to start out…

I am making small boxes and using 1/4 in walnet for the lids.  The piece that I used is slightly bowed and impairs the hinge fitting and lid closing flat…

Hello there, I recently viewed a video on the site regarding cross-cut sleds. http://www.finewoodworking.com/workshop/video/tune-up-your-crosscut-sled.aspx The author uses quarter sawn wood for the runners because of the lack of movement.  He…

Looking for source of 6d (2") Brass finish nails. Use in cabinet and finish work with natural wood to avoid unsightly wood fillers.

hey whats up guys this is the first time ive done a post in the knots forum so i hope some of yall can help me out.So i had a…

I wanted to see in your opinion which is more stable.... 3/4" full veneer core or 3/4" combi-core (veneer core with mdf faces) both would be laminated both sides to…

I have recently purchased some white oak lumber from a furniture factory which closed after 40 years.  most of the lumber is D or better, but some must have been…

I've got to redeck a trailer.  Apitong seems to be the wood of choice for this from what I've read but I have a supply of cumaru available.  Actually, I'm…

Is there a way to look at the grain direction so that I can see where I will have a problem with tear out when I do pattern routing?  …