Workshop Archives - Page 17 of 90

Workbench top — flat sawn hard or qurtersawn soft maple?
October 13, 2011

Hi I'm starting to build a workbench (about 30x72 inches). As I look over what wood I have, it seems I can use some 6/4 and 5/4 soft maple to…
Help finishing top of my workbench
September 23, 2011

Hi there, I built a workench with a top made of 3 layers of lamination: 2 outer MDF and 1 inner layer of pine planks. I glued and used…
Workbench Racking/Vibration – Help?
September 14, 2011

I started a new workbench a few weeks ago. I wanted to incorporate several Shaker bench designs and make a basic rectangular cube for the base, with the intent to…
Workbench tail vise not flush.
September 8, 2011

I recently bought an old used workbench, thats in pretty godd condition except the tail vise. I taken in apart, cleaned it and greased the skrew with Tallow. The problem…
Old carrage barn problem
September 3, 2011

I have a wonderful old carrage barn that I would like to move my shop out into in the future. My question or concern is; the structure is sided (since 1916)…
pole barn woodshop
September 1, 2011

Just a way to hang a few things when I'm done using them. Mainly hammers and squares ( got a few of them) and also some chisels I use. …
butcher block
August 25, 2011

I have an old butcher block,stands 33" off the floor and is 41" X 31"X 12" thick. Someone had painted the under side and caused the block to split. I…
Basement workshop dust collection
August 16, 2011

What are your thoughts about having a shop in the basement in the same area as the furnace and water heater? I'm mainly worried about the dust getting into the…
Lighting for Finish/Spray Room
July 4, 2011

Happy 4th to All! I am doing the mechanical/lighting plans for a new shop and I was wondering if anyone had recommendations for lighting in a small finishing room. …
shop wiring
June 11, 2011

I’m building a house and now am planning a double garage as a shop. My question is on how to design the wiring. I need recommendations on the electrical outlets,…

Page 17 of 90 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Workshop Archives - Page 17 of 90

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.