Workshop Archives - Page 20 of 90

Does anyone have a ventless natural gas heater in thier shop? My shop is a two car garage that is insulated, but I still need something to take the bitter…

I need to replace my circa 1991 shop vac and am looking for recommendations. I already have a Festool and love it, so I'm looking for something at a lower…

My wife asked me what I want for Xmas. I was thinking it would be nice to have a stereo in my shop. I have poor radio reception, so an…

I'm getting ready to buy a house that has a 28'X28' attached garage with a 12 foot ceiling. I'm going to partition off a half and turn that into a…

I just bought an Incra router plate (http://www.finewoodworking.com/ToolGuide/ToolGuideProduct.aspx?id=33768), but darned if I know where the opening in the table top ought to be.  Incra's table tops are either centered or…

From a local supplier to the deaf I purchased a doorbell, transmitter and three strobes.  Phone cord plugs into the transmitter, which also receives wireless signal from doorbell.  When the transmitter…

Recently, I had a new stand-alone workshop built.  It is 18' x 24' with a 10' ceiling and a 12' x 24' attic space with a vaulted roof.  The shop…

I posted this in Workshop originally. In FWW 209, Anatole Burkin showed his new shop with a DriCore floor. DriCore is OSB bonded to a high density polyethylene base. I…

I live in Houston and am building a 500 sq ft dedicated workshop (could be easily converted to a garage for resale) and want something  besides concrete for my floor.…

Good Morning. I am looking at buying a dust collection system for my small garage shop. My plan is to line my tools up along a 28' wall with the…