Workshop Archives - Page 33 of 90

Building a cabinet for table saw
June 19, 2009

I am new to woodworking and I’m finding it hard to work with my table saw because the stand was built for a much taller person not a 5’1” person…
Electricity
June 17, 2009

Putting together my woodshop and wired in a sub panel breaker box. Figured a 50 amp breaker would be enough to run everything. Table saw, band saw, jointer, planer, small…
Which Circuit for Tablesaw Safety?
June 16, 2009

Hello All, I don't anticipate this happening often, maybe ever again, but the power went off the other day while I was using the tablesaw. I was suddenly standing there in the dark…
Heating a 600 sqft shop??
June 3, 2009

I need to heat my 600 sqft shop. I am in there most days, so I want something I can leave on 24/7, but turn down over night. Something energy efficient…
Glue up for turning blanks
June 2, 2009

I might have asked a question in the wrong department (today is my first try at this) I'm gluing up two pcs of "Ash" on the flat ( 2"square) to make…
Dust collection upside down?
June 2, 2009

Common sense might dictate that dust, like any other matter, wants to fall as opposed to rise. I'm planning a from-scratch woodshop, and I'm considering putting my dust collector in the attic,…
sliding mitre saw placement
June 1, 2009

Any ideas on how to best locate a sliding mitre saw in a small (18'x28') shop that is already crowded... the problem is with all the room that the saw…
Looking for 1/2 in. Id. shims
May 25, 2009

I am trying to build up a slot cutter bit for my router table. The shaft, and arbor is .5 in. The slot cutters are also .5 in. I just…
Woodworking Auctions
May 18, 2009

Hello All, I came across an interesting website recently. Check it out at www.irsauctions.com They are an industrial liguidator of factories and facilities. I've seen some pretty good deals on…
30 gauge ducts for dust collection??
May 18, 2009

The metal ductwork available for sale for dust collection is 26 gauge or thicker. The typical HVAC ductwork is 30 gauge, and is readily available. Any books I read say that…

Page 33 of 90 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Workshop Archives - Page 33 of 90

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.