Workshop Archives - Page 69 of 90

Rigging an overhead hoist
February 9, 2007

I'm considering installing a chain hoist in my garage. We just moved into a new home, and a three-bay garage came with the package. I'm tying to set up a…
YORK END MOUNTED BENCH DOG
February 8, 2007

Bro. Lataxe et al. I only found the dog at Axminster tool UK. part #202394 on sale no less for 27.14 pounds the pair less VAT and the shipping was…
Workshop cabinets – MDF or Ply?
February 3, 2007

I am finally building my first "real" workshop and plan to line one wall with cabinets. Because space is limited the cabinets will do duty as both storage and as…
Miter Saw Stand Design
February 3, 2007

Hi, I just wandered in from Breaktime. I lurk in here from time to time, but usually don't post. Anyway, I designed a new saw stand that Taunton will probably…
Moisture
February 2, 2007

I've got a garage shop and can't seem to control the moisture. It's a 3 car garage under and is 8 ft deep in the earth. In the summer and…
Ash for a workbench top?
January 31, 2007

I've just learned that here in San Francisco I can get ash for roughly half the cost of maple, $2.84/bf for 4/4 and $3.96/bf for 12/4. Has anyone built a benchtop…
Epoxy floor coating
January 29, 2007

Any experience with epoxy floor coatings out there? I coated my 600 sq feet floor this week-end using Quikrete purchased at Lowes (3kits @ $62 a kit) and it went…
Gas unit heater recommendation?
January 29, 2007

Hi Gang, I'm working on a new shop building, 25x21 ft main space, with adjacent 25x11 auto bay that will be heated occasionally. Walls are 6-inch structural insulated panel (SIP),…
Two Story Workshop Plans?
January 28, 2007

I am looking for plans or photos of a small (20x17 or so) two-story building that can be a woodworking shop on the lower level and a hobby room above.…
Issue 188 hanging tool cabinet
January 27, 2007

Does anyone know why the sides of the issue 188 hanging tool cabinet is 13 1/4 inches wide instead of 13 or 13 1/2? The article does not explain the…

Page 69 of 90 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Workshop Archives - Page 69 of 90

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.