Gallery - Page 1169 of 1208

Walnut suggestion box adapted from a magazine plan for a Greene & Greene style mail box.  The article's author suggested mahogony, but I like the look of walnut and did…

 I USE HAND TOOLS AND A ROUTER ATTACHMENT FOR A DREMEL TO ACCOMPLISH THE DETAILED CARVING INTO THE TABLE TOP. I THEN PUT INDIVIDUAL PLACES TO SIT TO ADD A…

I meant to built a horizontal router table for a long time to mill sliding dovetail tail boards, raised panels with vertical router bits, tenons, and profiles on edges of…

Made from pine and meranti. Top is 600mm square cabinet is 850mm high. First assignment at tech college.

All the wood for this project was from neighborhood trees that I cut, planked, dried and milled.

All the wood for this project was from neighborhood trees that I cut, planked, dried and milled.

Sycamore Veneer Wall Unit with a gloss Lacqured Finish

Eucalyptus Veneer Shelving Display The slanting back wall and irregular curve made the layout and execution very challenging. Also incorporates lighting below top Shelf. Built the frame work for the...

Cherrywood Desk and Credenza with a small Office Table.  

This is a modified table saw cabinet from the great mag Woodsmith. I used the basic design except I chose not to use the side storage as in the original…