IWF Alert: Router table systems shine at the show
Since router tables entered the woodworking market a few decades ago, their convenience has crept closer and closer to full-sized woodworking machines, specifically the shaper. Of course the router’s advantage over the shaper has always been in the tooling, with router bits available in many more sizes and shapes than shaper cutters, and at a fraction of the price.
But early router-and-table combos fell far short of the shaper’s convenient adjustments, solid fence, and integrated dust collection.
Two new router table options at IWF do away with those compromises. The new Woodpecker PRL Sidewinder Router Lift is a heavy-duty mechanism with a couple of unique features. From above the table, where the usual height-adjustment crank goes in, the Woodpecker’s crank makes large movements only, pulling the router quickly to the top of its travel for fast bit changes, and then back down again. Fine adjustments are made with a crank placed at the side of the cabinet or stand, just under the table edge, much like a shaper. Like other lifts the Woodpecker works with any fixed-base router motor (sold separately). It will sell at Sears, Woodcraft, and elsewhere for roughly $360.
The Woodpecker lift works in any router table, including shopmade versions, and the side crank can be attached where needed. To avoid the time and hassle of building a router table, fence, etc., you’ll be able to buy Woodpecker’s entire table system, including the new lift, for $830.
Bench Dog’s new steel router table cabinet is a great companion to the cast-iron router tabletop they debuted last year (the ProMax RT). Tool geeks will remember Bench Dog’s past cabinet, which was made of melamine and had tons of storage. This one, for the same $400 price, seems even better, with a tighter dust-collection chamber under the router, which can be connected to the port in the fence for virtually dust-free routing.
A good caster system is standard, and the cabinet is fitted to accept standard slides for shopmade storage drawers, pull-out bit shelves, etc. Look for the new Bench Dog router cabinet in October.
Read about other great tool finds at IWF 2010
Comments
I already have PRL v2. Can i attach this crank system to my super-dupper PRLv2?
What I don't understand... why not just buy a shaper? For $800 plus router and accessories, you could easily get a very nice 3hp shaper with a 1/2 collet for holding router bits???
Log in or create an account to post a comment.
Sign up Log in