How to Align the Bandsaw Wheels

Roland Johnson
Sauk Rapids, Minn.

A Fine Woodworking contributing editor, Roland Johnson answers questions about keeping a bandsaw’s blade, tires, wheels, and guides adjusted properly for trouble-free cuts.

 

THE QUESTIONS

		Can I use the same blade for all types of cut, or should I have a different blade for resawing? Fine Woodworking EditorsPlay 1
		If the tires are worn down the middle, should I replace them or re-crown them? Fine Woodworking EditorsPlay 2
		How much horsepower do I need in a bandsaw? ‘marti038,’ via KnotsPlay 3
		How critical is it to keep the thrust bearings aligned? Fine Woodworking EditorsPlay 4
		What do you do when the guides slip out of alignment when you raise the head for a taller cut? ‘blewcrowe,’ via KnotsPlay 5
		How do I set up the saw and fences to cut a straight line, especially for resawing? ‘wpenny,’ via KnotsPlay 6
		To compensate for blade drift, should I skew the fence or adjust the wheel tracking? ‘Colebearanimals,’ via KnotsPlay 7
		To be sure the blade tracks properly, should I give the tires an adequate crown or adjust the wheels? ‘Wilburplan,’ via KnotsNow Playing
		When cutting curves freehand, how do I prevent the blade from binding or the work from slamming down on the table? Fine Woodworking EditorsPlay 9