Walnut Table built on commission. 42″h x 68″ x 32″. Legs are 4 1/4″ made from 12/4 stock glued up in two pieces and then milled to final dimension. The legs had to made in two pieces as they were longer than my lathe could support. Square piece is 9″ and the turned section is 32″. They are joined together with a 1″x 4 1/2″ dowel. Top is kiln dried walnut and the legs and aprons are air dried. The finish is sprayed vinyl sealer (two coats) and Sherwin Williams Pre-Catalized lacquer (three coats). Top is hand rubbed with rottenstone to achieve the desired sheen.

Stools are factory made. Probably asian.

Launch Gallery