Gallery
Radial arm saw
Jul 04, 2010
For a long time my radial arm saw sat on a make shift bench that I was not satisfied with. I had been planning to build something better, so I worked up a design and just finished today. I incorporated several bench features that I saw others try in their designs like bread board ends, pegged mortise and tenon joinery, and trestle style ends. Overall I am very pleased with how it turned out. But the thing that I am most pleased with is the fact that 100% of this bench is made from reclaimed wood. Some from pallets, others from an old barn, others from a former deck; every piece of wood used had a previous life.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
Comments
That's a really impressive piece of shop furniture. How did the it work out for you? I would be interested to know its dimensions. And did you design in a means for dust dust recovery or not? I could not tell from the pictures.
It's working out really well. I use it as both a radial arm saw bench and a hand work bench. Currently I don't have a dust catch system in my shop, but when I get one i'll modify the middle plywood insert to have a port behind the saw. The bench is about 900mm tall, 1980mm long, and 700mm deep. I can send you my plans if you are interested.
I also like your Radial Arm saw bench. I know the big deal now is to get rid of miter saws and radial arm saws and get sliding saws but I bought an old Dewalt RA saw last year from a guy who had inherited some equipment from his dad. This is a 60 year-old saw that I love and it is an 8 1/2 inch vs. 10 so a bit smaller which I really enjoy. Anyway, really like your bench and the way the saw is built into it- and the fact you used all recycled wood really adds to the project.
I think this is a great idea and might just use it. I have a 3'x12' bench across the back of my garage and have a Radial Arm saw on wheels. Right now it's sitting outside under a tarp because I don't have the floor space for it. Maybe I can cut up my bench to roll the saw right in so that it could also be removed. Next question should I put it in the middle, left or right side?. I like this idea because the saw's head can be moved almost flush with the wall and leave the bench top open until the saw is needed.
billum writes: i too would like to comment on your great idea for the radial arm saw. i bought one years ago to help with the construction of our new home built 27 years ago .and yes the saw really hasn't seen much action lately but with a work bench like yours ,i could put it to good use. any info or plans would be greatly appreciated
If you are interested in the plans send me an e-mail at [email protected]. I also have a lot of construction pictures that might help.
The large surface area must help when you have thick and heavy lumber to cut. I need more stability because the casters tend to move at the wrong time when I am ripping a long piece before I plane it. Nice work!
I agree with other viewer comments that you designed and constructed a very nice radial arm stand. I have both a dewalt and a delta two arm radial arm unit and am currently designing a new shop where I hope to be able to use both.
You have offered to provide plans and other information.
How do we exchange email addresses?
You can send me a line at [email protected] for the plans. Also, you can see some of my in-process pictures here: https://plus.google.com/u/0/photos/107811782926296586819/albums (look in the two albums marked 23 Feb 2011)
Log in or create an account to post a comment.
Sign up Log in