Wooden doors are perfect in providing security while also enhancing the aesthetic value of your property. However, with continual use, age and exposure to inclement weather, this material is bound to cave in. You might be meticulous in maintaining your doors but sometimes defects are unavoidable.

Rotting wood is the most common door problems especially with exterior fittings. With a carpentry course at Ableskills, you will be able to handle not only door repairs but also other wood related problems. This helps you save money in home maintenance while also enhancing the value of your property.

Steps in Tackling Rotted Door Problem

For exterior doors, the problem arises due to exposure especially where paint and other protection has worn off. If you want to restore your doors to their optimal look, you need to follow the right steps. This helps you to make the task easier and effective. Take a look:

Step 1

Removal of the rotted wood is the first step. In most cases, you will need to remove the weather stripping along the door to discover the extent of the rotting. You can do this using a chisel. Tools required include a utility knife, rasp, wood chisel, paintbrush, sandpaper grit and a putty knife.

Step 2

Preparation of the materials you will use is a critical factor you need to understand. In most cases, you will need polyester wood filler and epoxy. Epoxy is easy to mould and can easily be sanded to your door’s finish after the repairs. Wood hardener helps strengthen wood fibres but solidifies quite fast. As such, you need to work fast.

Step 2

Drill small holes across the damaged area and using a two-part hardener fill the holes in order to saturate damaged area with the solution. This helps harden the wood fibres to prevent further damage. Leave the hardener to dry before continuing with repairs. 

Step 3 hing you need to understand. here ook you need to follow the right steps. bestt the

When mixing the epoxy resin and hardener make sure to use different sticks to avoid hardening before appropriate mixing takes place. Take two golf-sized pieces of both products and mix them using a different stick.

Step 4

Using a putty knife mix the polyester filler with the hardener and quickly apply it into the recess and the holes you had earlier drilled. Apply more filler to get the desired finish and in order to fill the entire space along the damaged area. If the solution hardens before you are done, carve it with a rasp and apply a second layer of filler into the recess. Make sure there are no gaps left in the recess.

Step 5

Once you have filled the entire damaged area, give it a perfect finish by first sanding it, priming it with a primer before allowing it to dry. For maximum protection, give the door two coats of paint and your rotted door repair project will be done.

With a carpentry course,you will be able to diagnose the problem your door easily What’s more, you will not have to call in a carpenter every time you have a minor problem with your door.