How-To - Page 149 of 257

Sharpening: Stropping Blades
March 28, 2008

How to give a freshly sharpened blade a final touch. Part six of this 8-part series answering your questions about sharpening.
Sharpening: Different Bevel Angles
March 28, 2008

Yes, but you need not be obsessed with precise bevel angles. Part seven of this 8-part series answering your questions about sharpening.
Sharpening: A2 vs. O1 Steel
March 28, 2008

The A2 steel has added chromium so it stays sharp longer. Part eight of this 8-part series answering your questions about sharpening.
Sharpening Curved Blade Edges
March 27, 2008

Bob Van Dyke shows how to sharpen gouges, sweeps, and other curved blade edges.
Sharpening: Honing Guides
March 27, 2008

An argument for using a guide to achieve consistent results, in part three of our 8-part series
Burnishing a Gooseneck Scraper
March 27, 2008

Putting a burr on a curve is a matter of knowing where to stop.
Help Build the Fine Woodworking Dictionary
March 27, 2008

Send us a definition or add to an existing definition to help make this new dictionary the most comprehensive one on the planet.
A Fast-Drying Wiping Varnish
March 26, 2008

As they say at Indy, start your engines. Here's how to mix and apply a durable, fast-drying wiping varnish.
Sharpening: The Scary Sharp Method
March 26, 2008

A lesson in an effective, inexpensive way to put an edge on chisels and plane irons, in part one of this 8-part series answering your questions about sharpening.
Quick Tip for Bandsaw Blade Changing and Adjustments
March 26, 2008

When adjusting a bandsaw or changing its blade, it is difficult to set up the lower blade guides when peering under the table, especially for those of us who wear…

Page 149 of 257 Previous

Next

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.