Video - Page 187 of 223

Turning Gouge Primer
January 20, 2008

Why are there so many different gouges?
Turning Techniques: The Difference Between Shear Scraping, Shear Cutting, and Cutting
January 20, 2008

Learn the differences between these techniques and watch a demonstration of each in part two of an eight-part series on wood turning
Turning Tip: How to Tame Tearout
January 20, 2008

Avoid end-grain tearout with proper tool positioning and cutting in the right direction
How to Prevent Green Wood from Warping and Cracking
January 20, 2008

Turn a perfectly round bowl from green wood
How to Turn Difficult Grain
January 20, 2008

Lay down wayward grain using a traditionally-ground gouge
Precise Dovetails: Tips for Laying Out Tails
January 15, 2008

Andy Rae shares his secrets for making a dovetailed drawer that's square, flush, and flat at the corners.
Woodturning with a Steady Rest
January 15, 2008

This important accessory prevents spindles from vibrating. Ernie Conover shows how to use a commercial steady rest and how to make your own.
Precise Dovetails: Laying Out and Cutting Pins
January 15, 2008

Andy Rae shows how to keep the parts of a drawer properly oriented and how to mark pins quickly and accurately.
Precise Dovetails: Assembly and Glue-Up
January 15, 2008

Andy Rae shows how to get a tight fit in a dovetail joint and check the workpiece for square.
How to Sharpen Woodcarving Tools
January 15, 2008

Woodcarver David Sobol shows how to make gouges and V-tools razor sharp.

Page 187 of 223 Previous

Next

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.