Dovetails - Page 5 of 67

Essential Tool Box
December 19, 2015

I built the Essential Tool Box featured in FW. I mocified it by adding an extra drawer. I found when finished I didn't like what I was putting the box…
A Maloof inspired walnut rocker with some little variations.
December 8, 2015

I perform this Maloof inspired walnut rocker with some luck, and some personal detail add on. It take 200H.. Finish with Danish oil and oil-wax. www.my-rocker.com Dr Richard Zimmermann-Belgium
Jewellery cabinet (10th anniversary)
November 26, 2015

I have made this for my wife on 10th anniversary 2015. Maple burl and curly was used in front doors with wenge frame. Walnut wooden hinges were utilized to install the front…
outdoor bench
November 14, 2015

Outdoor bench. Steam bent and laminated oak, leopard wood, paduak, walnut, zebra wood, ebony, Madagasar ebony. Three layers of clear epoxy and several layers of marine varnish.
Wooden table saw / tennon milling machine …. Very accurate.
November 6, 2015

Accurate table saw milling machine - 0.03 mm thread adjusted wedge 30mm longitudinal = 1mm lateral. 4mm adjustment from initial double locked fence position, so 2mm either side of zero,…
UPDATE: Handcut Dovetails by Hendrik Varju
October 8, 2015

See who won a copy of Handcut Dovetails
Half-Blind Dovetails Cut by Hand
September 30, 2015

Christian Becksvoort shares his method for cutting half-blind dovetails, the next step in craftsmanship for the woodworker who has mastered through-dovetails.
Merlin – Teak and Beech credenza
September 10, 2015

Nesting Cabinet in stand. cabinet is fassened to stand with through wedged tenons. integral drawer and door pulls. stand, drawer fronts, carcasse interrior; European Beech. Carcasse is shopcut...
Mahogany Shaker Lap Desk
September 3, 2015

This is my version of Christian Becksvoort's Shaker Lap Desk (FWW #248). I didn't have any good white pine on hand but I did have a piece of mahogany that…
Cradle
August 19, 2015

This is my second attempt at a cradle. I used the same leg profile as the last one(I really like the strength and look of them). I purchased a new…

Page 5 of 67 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Dovetails - Page 5 of 67

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.