Frame And Panel - Page 12 of 56

A Kitchen Hutch
August 28, 2013

Material is pecan with maple back slats and mahogany pulls. Outside finish: clear oil/varnish blend. Inside finish: Clear dewaxed shellac. Lower "drawers" hide bins for counter top appliances and...
Mahogany Pennsylvania Tall Case Clock
July 30, 2013

In an earlier post I showed the start of this project. It has taken about six months to complete. The clock is all West Indies mahogany. The movement is an…
LInen press
July 14, 2013

Based on a similar piece at MESDA, in poplar with a red over black milk paint finish. Rat tail hinges. The upper cabinet hides a TV, the lower a stereo.…
Knotty alder kitchen from rough boards
July 9, 2013

After ten or so years dreaming about building my first kitchen I finally took the plunge! Thanks to a pile of almost free alder I came across, and all the…
Private Screening
July 3, 2013

My daughter's new home's open-concept living and dining areas begged for some nominal separation and this 80" tall by 8 ft folding screen seemed like the logical solution. The five African...
Mahogany Bed
June 25, 2013

Made this bed from from plans developed in Sketchup. Used 8/4 Mahogany planks resawed to get the desired parts. Mattress height was carefully set to enable transfer of owner to…
Small Bamboo Cabinet
June 21, 2013

Solid bamboo cabinet with sliding basket weave doors. Finished with Tried and True, original oil.
Æteriske Box
May 20, 2013

Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside. Inspired from a James Krenov piece. Made with...
The Wrighteous sideboard
May 20, 2013

3-doored sideboard of solid black Walnut.Drawbore pinned tenon and mortise assembly. Open slot mortise door frames.Handles of black Walnut and African Blackwood.Tung oil, Carnauba and Beeswax...
Cabinet inspired by Garrett Hack
May 3, 2013

I first came across Garrett Hack's work when I joined finewoodworking.com a couple of years ago. His small hand plane tool cabinet was something I had always wanted to build.…

Page 12 of 56 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Frame And Panel - Page 12 of 56

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.