Jigs - Page 13 of 20

Blade Alignment Jig
August 10, 2010

This jig is very useful for aligning your table saw blade or jointer fence to 90 degrees. No more need for slapping a square against your blade and sighting for…
Sharpen Jointer and Planer Knives
August 9, 2010

This jig is very useful for sharpening jointer and planer knives at home. The method uses the scary sharp method (wet sand paper on plate glass or granite). Mending plates…
Telescoping Crosscut Sled
August 4, 2010

This is my adaptation of Steve Maskery’s Crosscut Sled (Workshop Essentials 3 http://www.workshopessentials.com/ ).The base is 1/2” MDF, 24” x 24”. Thanks to the telescoping...
Bevel Edge Planer Sled
August 3, 2010

This is a sled for planing 45 degree angle beveled strips. Future upgrades will include a solid(ply) surface the planed parts will be placed on for better support, and…
Simple Taper Jig
July 29, 2010

This jig is designed to work with the Veritas bench clamps but other bench clamps with a 3/4" spigot would probably work. Basically it is a piece of 3/4" plywood…
Jig for router turning on lathe
July 26, 2010

Production jig and fixturing for router turning on lathe using mounted carriage that is taper guided. Router not shown on carriage in present photos. Note: Blanks...
Taper turned cane blank jig for table saw
July 26, 2010

This simple and adjustable jig slides along the table saw fence and with selected angle (taper) will create a finished turned cane blank by running the corners of the square…
Small Piece Clamp for Mitre Saws
July 25, 2010

Since I enjoy having fingers and some beveled/mitred cuts dont necessarily fit the engineering of the saw, I came up with this to both keep my fingers a healthy distance…
Simple Sliding Jig for Crosscut Guide
July 24, 2010

I have a quick tip you can use. It is simple to make and use, and allows multiple cuts with the crosscut fence. I have some tongue-and-groove mahogany scrap. I…
Jigsaw Circle Guide
July 23, 2010

Of all the jigs in my shop this is the one that I turn to the most. It will cut circles up the 24" in diameter, within a 16th of…

Page 13 of 20 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Jigs - Page 13 of 20

Get the latest from Fine Woodworking Magazine

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

#309-MAR/APR 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.